In this guide
Job Work Runs in Two Directions
Walk around any industrial estate in Gujarat and you will find units sending material out for plating, heat treatment, machining or painting, next door to units doing exactly that work for someone else. Job work is everywhere in Indian manufacturing, and it is where ERP stock figures most often drift away from reality.
Outward job work
You are the principal. You send your raw material or semi-finished goods to a job worker, who processes them and sends them back. The material is still yours while it sits in their premises.
Inward job work
You are the job worker. Customers send you their material, you process it and return it, and you bill only your processing charges. That material is never part of your stock value.
Both need clean stock tracking and both have GST rules attached. ERPNext handles outward subcontracting natively, and from v16 it handles inward subcontracting natively too.
Outward Subcontracting in ERPNext, Step by Step
Since v14, ERPNext separates the commercial side (what you pay the job worker) from the material side (what you sent and what came back). The flow looks like this:
-
1
Set up the item and BOM
The finished or processed item gets a BOM listing the materials the job worker will consume, including expected scrap. A separate service item represents the job work charge.
-
2
Purchase Order for the service
Raise a Purchase Order to the job worker for the service item at the agreed rate, marked as subcontracted. This creates a Subcontracting Order for the finished item.
-
3
Send materials
Transfer raw materials against the Subcontracting Order into a warehouse that represents the job worker. Your stock report now shows exactly what is sitting at each job worker.
-
4
Receive finished goods
A Subcontracting Receipt brings the processed goods into your store and consumes the materials from the job worker's warehouse per the BOM. Actual consumption and scrap can be adjusted to what really happened.
-
5
Book the job worker's bill
The job worker's invoice for processing charges is booked as a Purchase Invoice against the Purchase Order, with GST on the service.
The finished item's valuation then includes the materials consumed plus the job work charge. In v16, freight and handling on goods returning from the job worker can also be added through a Landed Cost Voucher on the Subcontracting Receipt, so those costs land in valuation rather than a general expense account.
The GST Rules Behind Job Work
Sending goods for job work is not a sale, so no GST is charged on the dispatch - provided you follow the rules that make it job work.
| Rule | What it requires |
|---|---|
| Delivery challan | Goods go out on a delivery challan, not a tax invoice, quoting the job work purpose. |
| Return time limit (Section 143) | Inputs back within 1 year, capital goods within 3 years. Moulds, dies, jigs, fixtures and tools are exempt. |
| If the limit is missed | The original dispatch is treated as a supply on the date sent; tax is payable with interest. |
| E-way bill | Normal thresholds apply, but inter-state movement from principal to job worker needs one regardless of value. |
| ITC-04 | The principal reports goods sent and received back. Half-yearly if turnover is above ₹5 crore, otherwise annually. |
ITC-04 filing dates: for turnover above ₹5 crore, 25 October (April-September) and 25 April (October-March); for others, 25 April for the whole year. GST dates do get revised, so confirm against the portal before you plan around them.
Getting ITC-04 Out of ERPNext
ITC-04 is painful when it is assembled from challan books and memory every six months. It is routine when every dispatch and every receipt is already in the ERP against a Subcontracting Order.
ERPNext's GST reporting comes from the India Compliance app, which builds ITC-04 data from the stock transfers, Subcontracting Receipts and subcontracting returns you have already recorded. The quality of that report depends entirely on discipline during the period:
- Every dispatch to a job worker goes through ERPNext, with a challan printed from it - no handwritten challans "to be entered later".
- Returns of unused material and rejected goods are recorded as returns, not quietly netted off.
- Scrap retained by the job worker is recorded on the receipt, so the quantities sent and received reconcile.
- Job worker warehouses are reviewed monthly for material approaching the one-year limit.
See how we set up GST compliance in ERPNext →
Watch the One-Year Clock
The Section 143 deadline is the most expensive job work mistake because it is silent. Nothing happens on day 365 - until an audit treats a year-old dispatch as a sale and asks for the tax and interest.
Because material at each job worker sits in its own warehouse in ERPNext, a stock ageing report filtered to those warehouses shows exactly which lots are getting old. We set this up as a monthly review for clients: anything older than nine months gets chased back or regularised before it becomes a liability.
Inward Job Work: When You Are the Job Worker
If customers send you material to process, you need to track their goods without letting them inflate your stock value or your balance sheet. Until v15 this meant workarounds - zero-valued items, separate warehouses, and manual reconciliation of what each customer had sent.
ERPNext v16 introduced native inward subcontracting: customer-supplied material is received and tracked as the customer's, consumed in your production, and the finished goods are returned with only your processing charges invoiced. For job workers, this is one of the strongest reasons to move to v16.
Common Job Work Mistakes We Fix
- Material issued as consumption instead of transferred to a job worker warehouse.
- No BOM for the processed item, so receipts cannot consume the right materials and valuation is guessed.
- Scrap ignored, leaving phantom stock at the job worker that never reconciles.
- Job work charges booked as a general expense rather than against the subcontracting order, so they never reach item cost.
- One warehouse for all job workers, which makes it impossible to see who holds what.
See our ERPNext setup for manufacturers →
Frequently Asked Questions
How does subcontracting work in ERPNext?
A Purchase Order for the job work service creates a Subcontracting Order. Materials are transferred to the job worker's warehouse, finished goods return on a Subcontracting Receipt that consumes them, and the job worker's charges are billed on a Purchase Invoice.
What is the time limit for job work goods under GST?
Inputs must return within one year and capital goods within three years, or the dispatch is treated as a supply from the date sent. Moulds, dies, jigs, fixtures and tools are exempt.
Who has to file ITC-04 and how often?
The principal files it: half-yearly if turnover is above ₹5 crore, otherwise annually by 25 April.
Is an e-way bill required for job work?
Normal thresholds apply, but inter-state movement from a principal to a job worker needs an e-way bill regardless of value.
Can ERPNext handle job work we do for customers?
Yes. ERPNext v16 added native inward subcontracting, tracking customer-supplied material separately from your own stock.
Final Verdict
Job work is where stock records and GST compliance meet. Track material at each job worker as your stock in its own warehouse, receive it back against a BOM, and ITC-04 becomes a report you run rather than a half-yearly reconstruction. If you do job work for others, ERPNext v16 finally gives you a native way to do it.
